Guangzhou EPT Environmental Protection Technology Co.,Ltd

Guangzhou EPT Environmental Protection Technology Co.,Ltd

High quality, Best service,Reasonable price.

Rumah
Produk
Tentang kami
Tur Pabrik
Kontrol kualitas
Hubungi kami
Quote request suatu
Rumah ProdukFume Eliminator

High Efficiency Dust Collector Filter Bagsfor High Temperature Resistant Fume

High Efficiency Dust Collector Filter Bagsfor High Temperature Resistant Fume

  • High Efficiency Dust Collector Filter Bagsfor High Temperature Resistant Fume
High Efficiency Dust Collector Filter Bagsfor High Temperature Resistant Fume
Detail produk:
Place of Origin: Made In China
Nama merek: ECOGRACE
Sertifikasi: SGS Certificate
Model Number: P84 500gsm ,p84 550 gsm,P84 450gsm,Polyimide,Polyimide filter bag
Syarat-syarat pembayaran & pengiriman:
Minimum Order Quantity: 300 PCS
Harga: 10-30 USD
Packaging Details: Polybag in cartons
Delivery Time: 20 days by order confirmed
Payment Terms: T/T ,L/C
Supply Ability: 20000pcs/month
Kontak
Detil Deskripsi produk

Polyimide filter bag ,Polyimide bag filter ,Polyimide dust filters ,

P84 filter bag ,P84 bag filter ,P84 filter ,P84 bag filter ,P-84 filter bag

1 Polyimide  raw material production
2 smooth surface and good air permeability.
3 different treatment

 

Good quality  filter bags Polyimide P-84 made with advanced machinery.accordingly adjusted technical process, strict raw material control and products quality control; with very competitive price.

 

Technical Specification:

Series:

 Polyimide550 GSM

Fibre:

100% Polyimide staple fibre

Scrim:

100% Polyimide scrim

Weight:

450 - 650g/m2 (customized)

Finishing:

Heat setting, single side singeing, calendering (double sides finishing would be available upon request), PTFE memebrane

Roll length and width:

Can be customized

Breaking strength:

(Longitudinal)(N): >800

(Transverse)(N): >800

Air permeability:

>200

Packaging:

In rolls

Applications:

Asphalt mixing plant, cement plant, smelting, waste incineration, etc.

Delivery Time:

7-45 days

Payment Terms:

 

 

Below fiber performance index for your reference.

 

 

 Operating Temperature (°C, dry)

 Abrasion Resistance

Hydrolysis Resistance

 Alkali Resistance

Organic Acid Resistance

Mineral Acid Resistance 

Oxidation Resistance (15%) 

Polyimide(P84)

 240/ (260)

 Good

 Good

  Fair

  Very Good

 Very Good

Very Good

 

  

Selecting the right replacement filter bag for your situation is critical to your operation. Grace  Filter provides a careful analysis of your current operating parameters and complete filter bag diagnostic testing to help improve your baghouse and dust collector performance and efficiency.

Grace Filter manufactures a complete line of aftermarket filter bags for nearly every baghouse or dust collector in operation. We manufacture most of the filter media used for our filter bags, which allows us to pass along the savings and produce the highest quality filter bags for your operation.

 

There are 5 primary steps you should go through when ordering a filter bag.

The main type of dust filter bags including Nomex filter bag ,PPS filter bags ,P84 filter bag ,PTFE filter bags ,Acrylic filter bags ,Polyester filter bags,dust filter bag ,bag filters,dust collector bags.

Step. 1 MATERIAL SELECTION

You should choose the media from which your filter bags dust filter bag will be constructed based on the type of application they will be used for. Take the following things into consideration prior to selecting your media:

  • Temperature - do your bags need to withstand extreme temperatures
  • Product - what are you filtering
  • Chemistry - can your bags withstand the chemical make up of the dust particles
  • Resistance- is the filter media able to resist the wear and tear of the dust particles

Choosing the correct filter media is an important and sometimes difficult process. To assist you in the identification of the right media for your bags, keep the following in mind:

Filter bag dust filter bag performance is directly related to how well it can tolerate the environment in which it is being used, how efficiently it can remove the dust particles and it’s ability to clean and renew.

You must first learn to identify the type of filter media currently used in your application. Below you will find a list of typical construction methods:

Synthetics

  • Thermoplastics
    • Polypropylene (PPRO)
    • Polyphenylene sulfide (PPS)
    • Polyester (PE)
    • NOMEX
    • PTFE
    • P84 ,POLYIMIDE
  • Thermoset

For additional information on media types please examine our sample chart

A simple test to determine if a material is a thermoplastic is to take a small swatch and put a flame to it. A thermoplastic material will begin to melt when exposed to direct heat.

The selection criterion eliminates materials based on temperature and chemical characteristics. The first cut is usually made based on temperature. Then the chemical characteristics of the gas stream are considered to further refine the search. Chemical Resistance. Next, the efficiency of the material further dictates the construction of the material i.e. – the weight – oz/sq. ft., fiber and surface treatments/membranes. Last but not least, if there are still two or more candidates it comes down to a price versus performance trade off.

 

Step. 2 MEASUREMENTS

(get accurate measurements for optimal performance)

Most dust collectors have been upgraded over the years due to the need for new permits which called for reconfiguration of the bag house in which case OEM configurations will have changed. Because of this you will need to obtain accurate measurements for your filters before ordering replacement filter bags. filter bags dust filter bag.

If you currently have filter bags ,dust filter bag  installed that are functioning properly, you can pull out one of those bags to get the proper measurements for your replacement order. (spare bags not yet used can also be measured if available) If you are removing a used bag to measure, please be sure to use all necessary precautionary measures set in place prior to removal (i.e. – gloves, protective garments, & respiratory equipment if needed) It is best not to pull the numbers off the unit because of possible changes to the configurations. e


Step. 3 and 4 TOP & BOTTOM CONSTRUCTION
(of the filter bag play can determine it’s efficiency)

The top and bottom construction of a filter bags and dust filter bag involves a variety of possible configurations. The type of cleaning process used by the dust collector determines which configurations will be used in the design of the filter bag.

 

TOP CONSTRUCTION
- snap band
- Raw edege
- Loop top

 

BOTTOM CONSTRUCTION
- snap band
- Beaded Cuff
- Overlock Disk
- Lockstitch Disk

 

MECHANICAL CLEANING (SHAKER) BAG HOUSES - usually found in critical applications

 

TYPICAL TOP CONSTRUCTION
snap band
- Raw edege
- Loop top

TYPICAL BOTTOM CONSTRUCTION of dust filter bag
- Double bottom
-
-

 

REVERSE AIR BAGHOUSES - usually found in large air handling environments dust filter bags  such as power plants and cement plants although they do have uses in a variety of industries.

 

TYPICAL TOP CONSTRUCTION
- Snap band
- Thick felt around
-

TYPICAL BOTTOM CONSTRUCTION
- Double bottom

 

Pulsejet (Reverse jet) Baghouses - found in almost every industrial environment. They are by far the most popular design and are seen in nearly all industry segments.

 

TYPICAL TOP CONSTRUCTION
- Snap band
- Thick felt around

TYPICAL BOTTOM CONSTRUCTION
Double bottom

 

Step. 5 ADDITIONAL OPTIONS
(can improve filter bag performance)

  • Ground Wire
    • Extended Top
    • Extended bottom
    • Extended top and bottom
    • Copper, Stainless Steel

GROUNDWIRE – Use to comply with Factory Mutual requirements for static dissipation. Groundwire can be found in stainless steel and copper and actually only works in a localized area of the filter. For optimal static dissipation look at conductive fiber filter made with Epitropic or Stainless Steel fibers.

WEAR CUFFS – Used to combat abrasion at the bottom of the bag either from “sandblasting” of the bags or bag-to-bag abrasion due to turbulence in the bag house. Usually 2 to 4 inches in length and made of a material similar to that of the body of the filter bag.

SPECIAL FINISHES – There are many finish options that can be added to the filter media at the time it is manufactured. Please refer to the materials selection area for further details.

Loop top - Sizing up the loop is simply a matter of the width and the height of the loop. The height measurement should always be taken as an inside dimension, especially for felt loops.

Grommet Top - Look for a number stamped on the grommet. It denotes the size in eighths of an inch (e.g. #3 grommet has a 3/8” diameter hole. Most grommets are brass but not if other construction.

Strap/Tail Top -Measure the width of the tail. The length is from the end to the point where it is sewn onto the bag body. Also note the number of layers of material that make up the tail. Most woven filters have two or three layers.

Metal Hanger - This is a variation on the loop with a metal hanger sewn into the loop. Be sure to measure the length to the center of the hanger. TIP: once you have the length, cut out the hanger and photocopy or make a digital photograph to then include with your RFQ.

Cap - Cap sizing with a measuring tap or calipers is very difficult. It is best to supply the cap if you intend to reuse them on the new bags, else request the bags and caps be supplied as a fitted pairing.

Snap ring -The size of the snap ring (Snap Band) is really determined by the diameter and thickness of the hole it is placed into. Those measurements must be either taken from the bag house drawings or actually measured on the bag house Tube Sheet while it is offline. If this is not possible, send us a snap ring. We can size the snap ring to one of our hundreds of test jigs we have especially for this.

Plain hem w/ clamp - The material is simply folded back and sewn. The length of the cuff may be critical, as this inlet to the bag tends to see the greatest velocity and dust loading and consequently the greatest wear.

Cap Top with Hook - Cap sizing with a measuring tap or calipers is very difficult. It is best to supply the cap if you intend to reuse them on the new bags, otherwise request the bags and caps to be supplied as a fitted pairing.

Corded cuff w/ clamp - Same as the plain hem but with the addition of a cord or rope inserted at the bottom. This reduces the likelihood of the bag pulling past the clamp and detaching from the tube sheet.

Compression Band - A Compression Band is similar to a Snap ring but rather than the gasket sealing to a Tube Sheet the compression band seals to a Metal Cap or a raised collar.

Raw edge/ Soft cuff - Raw edge bags have no measurement Do not if there is a “V” notch cut into the bag. Soft cuffs make for easier fold in of the bag. Measure the amount of the cuff outside and inside the main bag body.

Double beaded Snap ring - The size of the snap ring is really determined by the diameter and thickness of the hole it is placed into. Those measurements must be either taken from the bag house drawings or actually measured on the bag house while it is offline. If this is not possible we can size the snap ring to one of our hundreds of test jigs by having it sent in.

 

Rincian kontak
Guangzhou EPT Environmental Protection Technology Co.,Ltd

Kontak Person: Ms. Li

Tel: 1393344568

Faks: 86-755-8299412

Mengirimkan permintaan Anda secara langsung kepada kami (0 / 3000)